+8618144082725

Sales@filters-king.com

Fuel Filter Cross Reference
Produits
Accueil Donaldson Filter

catégories de produits

Nouveaux produits

DERNIÈRES NOUVELLES

Replace oil and oil filter steps

Replace oil and oil filter steps

1 Run the machine to warm up, stop and close the air outlet valve, and unscrew the fuel plug one turn to let the system relieve pressure. 2 Open the drain valve and drain the oil. After draining the oil, close the valve and transport the oil to the local waste oil treatment center. 3 Remove the oil filter. 4 Clean the oil filter holder, add lubricant to the gasket of the new oil filter, and tighten the oil filter by hand. 5 Remove the filler plug and refuel until the oil level reaches the plug. Retighten the filler plug. 6 Run the machine for a few minutes, stop, and wait a few minutes for the oil level to stabilize. Allow the system to relieve pressure by unscrewing the filler plug. Refuel until the oil level reaches the request and tighten the screw plug.

Vue :

Premier 1 2 3 >> Dernier
[  Un total de  3  des pages]
Droit d\'auteur © 2015-2019 China Everlasting Parts Co., Limited..Tous droits réservés.dyyseo.com
f t in y p
en ligne

le scanner

discuter maintenant S'il vous plaît cliquez ici pour enquête
Si vous avez des questions ou des suggestions, laissez-nous un message, nous vous répondrons dès que possible!